1,Integrated audio signal transmission, no external audio amplifier line, direct access function card
2,256 automatic brightness adjustment
3,Show Real-time,temperature and humidity
4,Smoke detection(need to add extra)
5,remote switch power of screen
6,Automatic temperature control, air-conditioning switch.
1. Without hub card.
2.Each cabinet with one receiving card (voltage, temperature, humidity, smoke)
3.It’s for Rental design screen and light bar ..etc .
4.small volume (less than 5CM wide)
5.Support 24 sets of data transfer
6.No separate power supply.
7.With EU standard
RV908/918 receiving card is same function like RV801+HUB75 and add more function as blow:
1.Include 12pcs HUB75 port with 16 pin interface (Without HUB75)
2.Support 12 bit HDMI input (For TS901)
3.18 signal processors, up to 18 bit each red, green and blue (260,000) gray
4.Support 1024×256 Pixels with 1024 grade color correction
5.Supports single-card color space conversion
6.Support configuration file readback
7.Support program to copy
8.Hot backup support dual receiver card
9.Support pixel fault detection
10.Support network cable testing
11.Support cable failure detection
12.Support the switch monitoring
13.Support Fan speed monitoring
14.Temperature Monitoring (Need to buy extra part)
15.Smoke Monitoring (Need to buy extra part)
16.with EU standards CE-EMC
Fully compatible with the seventh generation
Developed based on seventh-generation upgrade of the original function a lot more powerful, new features, the system is more stable and more reliable. Mixed with the seven-generation system.
Support 10-bit color
8 colors of the old system can only display 256X256X256 = 1677216 colors, the new system the number of colors 1024X1024X1024 = 1,073,741,824 colors, the new system the number of colors is the old system 64 times.
Smart Connect feature
With a display of multiple receiver card / box (including spare) can be exchanged without having to reset the receiver cards Smart earth identification to be displayed.
Every receiving card can have a temperature detection and four fan monitoring output, and control of the four fan speed can be intelligently based on user-set maximum temperature.
Icon is displayed
Automatically send the card power supply is not open display set up pictures, pictures of pixels to 128X128, the number of colors to 16K colors.
Support within 16 scanning
The original system only supports 1, 2, 4, 8, 16 scans, the new system for 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 scanning .
The support module width of any number less than 64
The old system only supports 2,4,8,16,32,64 width of the module, the new system for 64 or less arbitrary number.
Support special-shaped split display
Every receiving card can support 1024 the segment that profiled / text screen.
Support Yung-I insertion
How many points each access one or more blank pixels can be set for the special-shaped screen.
Support with the PWM driver chips
Need a special driver chip, thereby enabling the display effect more perfect.
Point by point correction function
Need a special driver chips with better display point by point correction.
Support point by point detection
Need a dedicated driver chips with dynamically detect display flaw.
Point by point correction to support a single point, 2 × 2 point, 4 × 4 and 8 × 8 point four correction mode, the maximum correction of 6144 points / module, red, green and blue 256. By card (box) correction is used to display the various inter-tile color correction, red, green and blue 256.
Smart identification card function
The intelligent identification program can identify the two-color, full-color, virtual lighting and other various driver board a variety of scanning and a variety of signals toward the recognition rate of 99%, a card in hand, to do the screen worry.
Gray level set function
The customer may never display grayscale to 65536 (64K) adjust the gray, so your display to achieve the best effect.
Arbitrarily set the refresh rate, phase locking, synchronization function
The refresh rate from 10Hz-3000Hz arbitrarily set the refresh rate lock-in feature allows the display refresh locked to an integer multiple of the computer monitor refresh rate to eliminate image tearing to ensure that the image perfect reproduction. Phase-locked range of 47Hz-76Hz.
Dual cable load 1280×1024, single-cable maximum load 1024×640, 1280×512
Dual-cable hot backup function
Receiver card A, B, two-port can be used as input or output ports, two computers can be used to simultaneously control a screen when a computer problem, another computer to automatically take over a computer network can also be used control line, when a cable problem, and the other a cable automatically take over, so that the display of the normal work to be given maximum protection.
Multi-screen synchronization and composition of functions
Support a control send a card with multiple screens, multiple screens operating status can be any combination, synchronous display, independent play, etc. through shortcut keys to quickly switch.
256 automatically adjust the brightness
256 automatic brightness adjustment feature lets you display brightness adjustment is more effective.
Program online upgrade feature
If the display card receiving procedures need to upgrade, simply open the power of large screen LED Studio can upgrade process, do not need to receive the card demolition away from the big screen can be upgraded.
Receiver card integration test, then do not send cards to test the display, slash, gray, red, green, blue, full brightness, etc. a variety of test mode.
Long transmission distance
Transmission up to 170 meters (measured) to ensure the transmission of 140 meters.
LED Studio 10